This manual PDF download describes procedures for operation, handling, lubrication, maintenance, checking, and adjustment for the Komatsu PC75UU-3 Hydraulic Excavator (S/N: 15001 and up). It will help the operator or anyone realize peak performance through effective, economical and safe machine operation and maintenance.
APPLICABLE MODELS :
Komatsu PC75UU - S/N: 15001 and up
TABLE OF CONTENTS :
- SAFETY
- OPERATION
- MAINTENANCE
- SPECIFICATIONS
- OPTIONS, ATTACHMENTS
MANUAL SPECIFICATION :
File Format : PDF
Language : English
Printable : Yes
Searchable : Yes
Bookmarked : Yes
Product Code : SEAM023200
Total Pages : 220
This page sometime can be found use following keyword : service manual, repair manual, workshop manual, technical manual, owner manual, operating manual, maintenance manual, parts manual. Please make sure you read and understand the title of this manual before decided to buy.
-
COVER
1.FOREWORD
2.SAFETY INFORMATION
3.INTRODUCTION
4.LOCATION OF PLATES,TABLE TO ENTER SERIAL NO.AND DISTRIBUTOR
5.CONTENTS
SAFETY
6.GENERAL PRECAUTIONS
7.PRECAUTIONS DURING OPERATION
7.1 BEFORE STARTING ENGINE
7.2 OPERATING MACHINE
7.3 TRANSPORTATION
7.4 BATTERY
7.5 TOWING
7.6 LIFTING OPERATIONS
7.7 WINDOW WASHER FLUID
8.PRECAUTIONS FOR MAINTENANCE
8.1 BEFORE CARRYING OUT MAINTENANCE
8.2 DURING MAINTENANCE
9.POSITION FOR ATTACHING SAFETY LABELS
OPERATION
10.GENERAL VIEW
10.1 GENERAL VIEW OF MACHINE
10.2 GENERAL VIEW OF CONTROLS AND GAUGES
11.EXPLANATION OF COMPONENTS
11.1 MACHINE MONITOR
11.2 SWITCHES
11.3 CONTROL LEVERS AND PEDALS
11.4 ENGINE HOOD
11.5 FRONT WINDOW
11.6 SLIDING DOOR
11.7 REAR WINDOW
11.8 HAMMER FOR EMERGENCY ESCAPE
11.9 FUSE BOX
11.10 FUSIBLE LINK
11.11 CAP WITH LOCK,COVER
11.12 TOOL BOX
11.13 GREASE GUN HOLDER
11.14 OPERATION AND MAINTENANCE MANUAL POCKET
12.OPERATION
12.1 CHECK BEFORE STARTING ENGINE
12.2 STARTING ENGINE
12.3 OPERATIONS AND CHECKS AFTER STARTING ENGINE
12.4 MOVING MACHINE OFF
12.5 STEERING MACHINE
12.6 STOPPING MACHINE
12.7 SWINGING
12.8 PROHIBITIONS FOR OPERATION
12.9 PRECAUTIONS FOR OPERATION
12.10 PRECAUTIONS WHEN TRAVELING UP OR DOWN HILLS
12.11 WORK POSSIBLE USING HYDRAULIC EXCAVATOR
12.12 PARKING MACHINE
12.13 CHECK AFTER FINISHING WORK
12.14 STOPPING ENGINE
12.15 CHECK AFTER STOPPING ENGINE
12.16 LOCKING
12.17 HOW TO ESCAPE FROM MUD
12.18 REPLACEMENT OF BUCKET
12.19 HANDLING 4-SYSTEM
12.20 HANDLING RUBBER SHOES (RUBBER SHOES ONLY)
13.TRANSPORTATION
13.1 LOADING,UNLOADING WORK
13.2 METHOD FOR LIFTING CHASSIS
13.3 PRECAUTIONS FOR LOADING
13.4 PRECAUTIONS FOR TRANSPORTATION
14.COLD WEATHER OPERATION
14.1 PRECAUTIONS FOR LOW TEMPERATURE
14.2 CAUTIONS AFTER COMPLETION OF WORK
14.3 PREPARING THE CAB HEATER
14.4 AFTER COLD WEATHER
15.LONG-TERM STORAGE
15.1 BEFORE STORAGE
15.2 DURING STORAGE
15.3 AFTER STORAGE
16.TROUBLESHOOTING
16.1 PHENOMENA THAT ARE NOT FAILURES
16.2 METHOD OF TOWING MACHINE
16.3 PRECAUTIONS ON PARTICULAR JOBSITES
16.4 IF BATTERY IS DISCHARGED
16.5 OTHER TROUBLE
MAINTENANCE
17.GUIDES TO MAINTENANCE
18.OUTLINES OF SERVICE
18.1 OUTLINE OF OIL,FUEL,COOLANT
18.2 RELATING TO ELECTRIC SYSTEM
19.WEAR PARTS LIST
20.USE OF FUEL,COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
21.STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
21.1 TORQUE LIST
22.PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
23.MAINTENANCE SCHEDULE CHART
23.1 MAINTENANCE SCHEDULE CHART
23.2 MAINTENANCE INTERVAL WHEN USING HYDRAULIC BREAKER
24.SERVICE PROCEDURE
24.1 INITIAL 250 HOURS SERVICE
24.2 WHEN REQUIRED
24.3 CHECK BEFORE STARTING
24.4 EVERY 50 HOURS SERVICE
24.5 EVERY 100 HOURS SERVICE
24.6 EVERY 250 HOURS SERVICE
24.7 EVERY 500 HOURS SERVICE
24.8 EVERY 1000 HOURS SERVICE
24.9 EVERY 2000 HOURS SERVICE
24.10 EVERY 4000 HOURS SERVICE
24.11 EVERY 5000 HOURS SERVICE
SPECIFICATIONS
25.SPECIFICATIONS
OPTIONS,ATTACHMENTS
26.USING CAR RADIO
26.1 EXPLANATION OF PARTS
26.2 METHOD OF USE
26.3 PRECAUTIONS FOR USE
27.USING CAR COOLER
27.1 OPERATION OF CONTROL PANEL
27.2 PRECAUTIONS WHEN USING
27.3 INSPECTION AND MAINTENANCE OF CAR COOLER
28.HANDLING WINDOW WASHER
28.1 OPERATION OF WINDOW WASHER
28.2 CHECK WINDOW WASHER FLUID,ADD FLUID
29.HANDLING BUCKET WITH HOOK
29.1 CHECKING FOR DAMAGE TO BUCKET WITH HOOK
29.2 PROHIBITED OPERATIONS
29.3 PRECAUTIONS DURING OPERATIONS
30.GENERAL PRECAUTIONS
30.1 PRECAUTIONS RELATED TO SAFETY
31.INTRODUCTION OF ATTACHMENTS
31.1 PRECAUTIONS WHEN INSTALLING ATTACHMENTS
31.2 PRECAUTIONS WHEN USING HYDRAULIC BREAKER
-